Intermediate Question looking at a surface cleaning rig. wiil this do?

[mohadeeb]

I found a company called Daimer. And am looking at the specs for one of their surface cleaning set ups. looking to use this to do both tile and grout and concrete.Product Specifications Recovery Tank Size10 gallons Flow Rate (extraction)30 gallons/minute Air Flow107 cfm Water Lift143" Vacuum Hose50' hose included Dump Hose50' hose included Squeegee Wand12" squeegee wand with 4 internal jets included Spinner Length46 inches Spinner Diameter19 inches Spinner RPM1000 rpm Pressure1000 psi Heating MethodPropane Propane Tank40 lb. empty tank included Temperature Optionscold, hot & wet steam (steam cannot be used with spinner head) Temperature (Hot)up to 210º F Temperature (Steam)up to 330º F (not for use with spinner head) Heater Exchange Coilhigh-pressure stainless steel Heater Response Timeconverts cold water to hot water in approximately 30 seconds Chemical Infusionyes - siphon type standard Pressure Wanddurable 3' trigger wand with quick disconnect Pressure Nozzles0º (blast), 15º, 25º, 40º, steam nozzles Steam Hose25' high pressure steam hose Optional Wands



my question is, is 1000psi at 2.5gpm eough to clean concrete when combined with the right chems.
If not this sounds like a good set up for indoor flooring.

thanks

Nam
Dirty Jobs Unlimited, LLC

[MMI Enterprises]

Pics?
For inside tile, etc. you may be better off getting an autoscrubber, a specialized grout machine with a beeterbar type brush, or a full hot high pressure washer with recovery system. This thing may seem fancy to some but what is it and why?. Sounds like they hooking a very small pressure washer to a small surfacer and calling it a pro level machine?. Is the vac also hooked to the round surfacer or just the sqweegie wand? "Squeegee Wand12" squeegee wand with 4 internal jets" - this maybe the most interesting thing about it to me.

[tools000]

what brand recovery unit i am looking for a good one for the system that i am building making sure epa stays off my butt