Pivot nozzle holder

[Russ Johnson]

This neat little device will mount to any standard 1/4" lance. A nozzle or QC for a nozzle can be mounted in it. The pressure holds it in the set position.
Specs:
Solid Stainless Steel
270 Degrees Rotation
5,070 PSI
10 GPM
300 Degree Max Temp
1/4" FPT In And Out
$36.31 Each

[Andrew Bandarovich]

Will it hold 90 degree angle on a 5 gpm 1000-3500 psi?

[Russ Johnson]

Yes it will. Once the high pressure hits it, it locks tightly into position.

I will offer anyone who wants to try one a 10 day money back guarantee. Return it within 10 days in good condition if you're not happy, I'll issue you a refund.

[Andrew Bandarovich]

I works! It locks in any angle i put it in even on 5 gpm skid. Way better than flex wand.

[Christopher]

Russ, do they make this in 3/8"????

I am thinking that if they do, you might be able to use that to connect 2 hoses on the hose reel say after 100' and then the swivel will allow the hose to contour to the curve of the hose reel instead of both ends of the hoses being kind of straight and not contouring and causing a lump on the hose reel or in time, causing a leak.

You would have to roll the hose up without pressure in the line and it might work, if so, you can connect a lot of 50' hoses together using these and not have the problem of the hoses not rolling up good.

Just an idea.

[Russ Johnson]

Russ, do they make this in 3/8"????

No...

[Christopher]

Ok, Thanks Russ.

[Andrew Bandarovich]

Cant you use 3/8 x 1/4 pipe bushings?

[Douglas Hicks]

Cant you use 3/8 x 1/4 pipe bushings?

I would think about a bell reducer at the pressure we use.

[charlie]

I like it, will call to order.

Charlie

[Russ Johnson]

I can get 3/8" FPT X 1/4" MPT hydraulic adapters to go in it.

[Christopher]

Russ, I got to try out that pivoting nozzle holder that I won at the Tampa Round table.

It is very good and helpful!

I had to wash a lot of bird droppings from a 4-level deck and you just bend it to the angle you need it at and wash. It really holds it's angle and sure makes it easy with lots of obstacles like rails, spindles, etc... getting them cleaned.

Thanks for introducing that Russ!

I highly recommend it to anyone doing wood restoration or fleet washing, it really is handy to use!