Chemical Injector problem

[calltodd]

I probably don't run clear water through the injector often enough. I'll work on that.
But I really do loose the oring. I'm running almost straight 12.5% and 1 or 2 steppeng trucks.
Anyone selling just the oring??? By the way it is a Super Suds Sucker, and when it works, it works.

[calltodd]

#9 oring from the hardware store has been working fine.

[cleanhoods]

Also check to see if your orfice size is the right one for your machine.
I agree for my line of work i would rather use a sprayer then a DS less problems and less things to go wrong and or damage.
Marko

[Douglas Hicks]

I probably don't run clear water through the injector often enough. I'll work on that.
But I really do loose the oring. I'm running almost straight 12.5% and 1 or 2 steppeng trucks.
Anyone selling just the oring??? By the way it is a Super Suds Sucker, and when it works, it works.

Get a 5 gallon bucket, filled w/clean water. Drop the chemical hose in the bucket and put a clamp on the gun. run the pump while rolling up your supply hose. I have used the same ds for several months now.

[calltodd]

Thanks for all the good advice. Been running water thru the injector at the end of the day, haven't blown any more o rings since. I usually take the gun off and just let the hose run so I can run down the tank.
As for the orifice, I am probably running a 3, but I have a 4 on it's way..........
Todd